EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is usually a extremely successful photo voltaic controller made for off-grid solar techniques. Depending on multiphase synchronous rectification engineering, it ensures optimized Electricity conversion and system stability for an array of photovoltaic (PV) programs.

Key Options of the EPEVER Tracer AN Collection Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller know-how for exceptional solar Electricity harvesting. Essential options contain:

Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery existence.
LCD Show with actual-time info monitoring.
A number of Load Management Modes which include guide and timer.
Thorough Digital Protections from overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all parts are provided: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the design variety and voltage rankings match your solar panel and battery specs.
2. Mounting the Cost Controller
Pick a well-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and make sure the program is run off ahead of connecting elements.

Step one: Link the battery terminals towards the demand controller (beneficial to optimistic, unfavorable to destructive).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power to the controller by connecting the battery first.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Info may be logged by using the RS485 conversation port using program for example Solar Station Laptop.
Remote checking is possible Using Click Here the EPEVER WiFi module.
six. Troubleshooting Prevalent Concerns
Issue 1: No Power Output

Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Safety

Confirm the solar array’s voltage ranking.
Regulate procedure parameters if required.
Difficulty three: No Battery Charging

Inspect PV wiring for continuity.
Affirm MPPT options within the menu.
Great things about the Tracer AN Sequence with MSR Know-how
The multiphase synchronous rectification technologies makes certain:

Greater Effectiveness: Reduced Strength losses throughout conversion.
Improved Trustworthiness: Stable effectiveness under variable masses.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar power generation and lengthening battery life. By next the above set up guideline, end users can be certain most effectiveness and procedure longevity.